Skip to content
Tax Guides

TPAR Explained: Who Lodges a Taxable Payments Annual Report

AL
Written by Antti Laitinen
9 min read
TPAR Explained: Who Lodges a Taxable Payments Annual Report

Do you need to lodge a TPAR? The short answer

A taxable payments annual report (TPAR) tells the ATO how much your business paid contractors during the financial year. You lodge one if you work in building and construction, cleaning, courier or road freight, IT, or security, investigation and surveillance, and you pay contractors to deliver those services. The report is due 28 August each year, it lists what you paid each contractor, and the ATO matches those figures against what the contractors declare. This guide walks the industry-by-industry test, the details to record for every contractor, how and when to lodge, and what a late report costs.

What a TPAR is and why the ATO runs it

The taxable payments reporting system (TPRS) exists to close a gap. Contractors invoice through an ABN and report their own income, and some under-report it. The ATO's answer is to ask the businesses that pay them to report the payments too, so the agency has both sides of each transaction.

The report covers six relevant services: building and construction, cleaning, courier, road freight, IT, and security, investigation or surveillance. If your business supplies one of these and pays other businesses or individuals to help deliver it, you are likely inside the system. From the 2026 financial year the ATO also pre-fills contractors' income tax returns with TPAR data, so the numbers you lodge feed straight into your subcontractors' returns.

The TPAR is not a payroll report. Payments to your own employees go through Single Touch Payroll, not the TPAR. The report is only about money paid to contractors for a relevant service.

Do you have to lodge? The industry-by-industry test

Two different tests decide it, and which one applies depends on your trade.

Building and construction runs on its own rule. You are "primarily" in building and construction, and so you must lodge, if any one of three conditions is met.

Building and construction testYou lodge if
Current-year income50% or more of this year's business income is for building and construction services
Current-year activity50% or more of this year's business activity relates to those services
Prior-year income50% or more of last year's business income was for those services

The prior-year test catches a business whose mix shifts. The ATO's example is a cabinet maker who will not earn 50% from building and construction this year but did last year: the prior-year test still makes the report due. The building and construction rule is a 50% test, not the 10% test below.

The other five services use a 10% threshold. You divide the payments you received for the relevant service by your current or projected GST turnover. Ten per cent or more, and you lodge; under 10%, and you do not. The ATO's worked example is Jehan Building, with $100,000 of GST turnover and $10,000 from cleaning services. That is exactly 10%, so Jehan has to lodge a TPAR for the cleaning payments it made to contractors. If you provide both courier and road freight services, you combine the income from the two before you apply the 10% test.

A business under 12 months old uses projected GST turnover for the year. If you want to check whether you are over the registration line at all, our guide to the GST registration threshold covers how current and projected turnover are worked out.

What to record for each contractor

The TPAR is a list, one row per contractor, built from the payments you made across the year. For each contractor the ATO asks for:

What you reportDetail
ABNThe contractor's ABN, where you know it (see ABN vs ACN)
NameThe contractor's name, business or individual
AddressThe contractor's address
Gross amount paidTotal you paid them for the year, GST included, in whole dollars
Total GSTThe GST included in those payments
Tax withheldAny amount withheld where the contractor did not quote an ABN

Two details trip people up. The gross amount is what you paid during the financial year, not what you were invoiced: an invoice dated June that you pay in July belongs in the next year's report. And the figures go in as whole dollars with the cents dropped, so $5,600.85 is reported as $5,600, not rounded up.

The gross figure includes GST, which is why a contractor's TPAR total runs higher than the fee they keep. A contractor who receives a TPAR should report their billed income from their own books, with the GST set aside as tax they remit, rather than copying the gross across. A clean tax invoice from each contractor gives you both numbers, the fee and the GST, in one place.

Payments you don't report

Not every dollar that leaves the business lands on the TPAR. You leave out:

  • Payments to your own employees. Those are payroll and go through Single Touch Payroll.
  • Materials only. A pure supply of goods with no relevant service attached stays off the report.
  • Invoices unpaid at 30 June. You report payments made, so an amount still owing at year end waits for the year you pay it.
  • Labour-hire arrangements. Where you pay an agency that supplies the workers, the agency handles its own reporting.
  • Private work. A homeowner paying a builder to renovate their own home is acting in a domestic capacity, not running a business, so no TPAR applies.

How and when to lodge your TPAR

The TPAR is due 28 August each year, covering the financial year that ended the previous 30 June. When 28 August falls on a weekend, the ATO treats the report as on time if it arrives the next business day. For the 2026-27 financial year that matters: 28 August 2027 is a Saturday, so the report is on time if you lodge by Monday 30 August 2027.

Paper is no longer an option. The ATO stopped accepting paper TPARs after 28 August 2025, so you lodge online one of three ways:

  • Online services for business. Go to the Lodgments menu, then Taxable payments annual reporting, and enter each contractor by hand. You can save a draft and come back to it. A sole trader uses Online services for individuals and sole traders.
  • SBR-enabled software. Accounting or payroll software that supports the TPAR specification creates the data file, which you upload through the file transfer function in Online services for business.
  • A registered tax or BAS agent. They lodge it for you through their own channel.

If you lodged a TPAR before but no longer need to, tell the ATO with a non-lodgment advice rather than leaving the obligation open, or the system keeps expecting a report.

Miss the deadline and the ATO can apply a failure to lodge on time penalty. For a small business it is one penalty unit for each 28 days, or part of 28 days, the report is late, up to a maximum of five units. A penalty unit is $364 from 1 July 2026, so a TPAR left five months late reaches $1,820. The ATO can remit the penalty where your circumstances justify it, but the cheaper move is to have the figures ready before 28 August.

Capture it as you pay, not in a scramble in August

The report itself takes an afternoon when the records are already there. It becomes a nightmare when August arrives and you are reconstructing a year of subcontractor payments from a drawer of crumpled invoices and a bank feed with no names attached.

Take a cleaning business that pays three regular subcontractors. Over the year it makes dozens of payments to them. If every contractor invoice is filed the day it arrives, with the amount and GST already read off it, the TPAR is a filter-and-total job in August. If nothing was filed, someone spends days matching bank lines to half-remembered jobs, and the GST column is guesswork. The ATO's record-keeping rules ask you to keep these records for five years anyway, so capturing them as you pay does double duty.

How SparkReceipt keeps the numbers ready

The TPAR stands on the records behind it: what you paid each contractor, and how much of that was GST. SparkReceipt reads each contractor invoice and receipt the moment it lands, pulls out the vendor, date, amount and GST, and files it as a categorised record. You can filter the expense tracker by vendor to see the year's total for one contractor, and pull a tax-ready summary with expense reports, so the gross-and-GST figures each TPAR row needs are documented before 28 August. SparkReceipt does not lodge the TPAR for you, that still goes through Online services for business, your software or your agent, but it means you are reporting from organised records rather than a shoebox. Get Started for free.

Frequently asked questions about the TPAR

A business that pays contractors to provide building and construction, cleaning, courier, road freight, IT, or security, investigation and surveillance services. Building and construction uses a 50% test; the other five use a 10% test on the share of your GST turnover that comes from the relevant service.

28 August each year, for the financial year that ended the previous 30 June. If 28 August falls on a weekend, you have until the next business day. 28 August 2027 is a Saturday, so the 2026-27 report is on time if lodged by Monday 30 August 2027.

For cleaning, courier, road freight, IT and security services, you divide the payments you received for the relevant service by your current or projected GST turnover. If the result is 10% or more, you lodge a TPAR. Building and construction does not use this test; it uses a 50% test instead.

Their ABN where you know it, name and address, plus the gross amount you paid them for the year including GST, the total GST in those payments, and any tax withheld where no ABN was quoted. Amounts go in as whole dollars with the cents dropped, and you report what you paid, not what you were invoiced.

No. Payments to your own employees go through Single Touch Payroll, not the TPAR. The report only covers payments to contractors for a relevant service. Payments for materials only, and invoices still unpaid at 30 June, are also left out.

The ATO can apply a failure to lodge on time penalty. For a small business it is one penalty unit for each 28 days or part of 28 days the report is overdue, up to five units. A penalty unit is $364 from 1 July 2026, so the maximum reaches $1,820. The ATO can remit the penalty in some circumstances.

Key takeaways

  • A TPAR reports what you paid contractors for building and construction, cleaning, courier, road freight, IT, or security, investigation and surveillance services, so the ATO can match it against what those contractors declare.
  • Two tests decide if you lodge. Building and construction uses a 50% test on current or prior-year income; the other five use a 10% test on the share of your GST turnover from the relevant service.
  • Each contractor row needs their ABN, name and address, the gross paid including GST, the total GST, and any tax withheld, in whole dollars, based on what you paid rather than what you were invoiced.
  • The deadline is 28 August, moving to the next business day on a weekend, and paper is no longer accepted: you lodge through Online services for business, SBR software, or a registered agent.
  • Late lodgment carries a penalty of up to five penalty units for a small business, $1,820 at the $364 unit from 1 July 2026, so the records are worth having ready early.
  • Capture contractor invoices as you pay them, with the amount and GST read off each one, and the report is a filter-and-total job instead of an August reconstruction.
Get Started